微信最早推广收费吗

High Pressure Pump Manufacturers

A pump that discharges pressure greater than 800 psi is known as a high pressure pump. Pumps classified as moderate high pressure discharge pressure between 800 and 3000 psi, and those classified as very high pressure pumps discharge pressures ranging from 3000 to 5000 psi. Another type of pump based on the same classification is the ultra high pressure pump, which discharges pressure well in excess of 5000 psi, in many cases ranging from 10,000 psi to 40,000 psi. Some common high-pressure pumps are triplex plunger pumps and quintuplex plunger pumps. Another device that can generate high pressure is a hydraulic intensifier or amplifier, which uses hydraulically actuated piston to pressurize the working fluid.

Search » Pumps » High Pressure
Showing 1-22 of 22 Manufacturers
Logo for General Pump General Pump (Mendota Heights, MN)

Manufacturer

www.generalpump.com/Markets/HighPressure.asp

General Pump high-pressure plunger pumps are designed and manufactured to pump water and other liquids of similar viscosity compatible with the construction materials used in the pump. Durable by design, these plunger pumps are built to ISO 9008 standards and are ideal for a variety of intermittent or continuous-duty applications and water sandblasting. You won’t find better high-pressure pumps anywhere.

Product(s) by General Pump
Logo for Jet Edge Jet Edge (St. Michael, MN)

Manufacturer

https://jetedgewaterjets.com/

Jet Edge offers a wide variety of High pressure Waterjet Pumps.

Product(s) by Jet Edge
MAXPRO Technologies, Inc. (Fairview, PA)

Manufacturer

Maximator high efficiency pumps are ideal for a broad variety of oil, water and chemical applications. They feature a large air piston joined to a smaller diameter plunger. The pressure ratio is the difference of these two areas and is the method of determining maximum output pressure. Higher pressures are obtained by using higher pressure ratios. Maximator model numbers reflect the pump's nominal pressure ratios, while the technical data indicates exact ratios.

CHENG NI AN TECHNOLOGY CO., LTD. (Taichung, Taiwan)

Manufacturer

Cast Iron series characteristic:Strong corrosion resistance, suitable for high corrosive pesticide use. Plunger:SST plungers with special surface treatment for extra hardness, smoothness and resistance to wear and corrosion. Inlet and outlet chambers:Spheroidal-graphite cast iron manifold with special treatment for corrosion resistance. Crank:Burnish process of the surface between the crank and the pull rod for lubricity and wear-resistance. Case:The case is made of sturdy, durable aluminum alloy. Give pressure relief automatically, Save energy Application : Irrigation: Ideal for spraying on rice, tea, cotton, gardening plants and other agricultural plants Provide water to crops in dry areas Water Transport: Water supply of construction site Farmland irrigating, hillside water carriage and yard spraying Capable of pumping liquids up to 3 km over flat ground or 400 m at a 60 degree incline Cleaning: Car, motorcycle and air-cooler cleaning Power Spraying: As a fire-fighting machine Cooling-down system of greenhouse Pressure test of new installed pipes inside a building Disinfectant Spraying: Used for spraying chemical disinfectant for sanitary applications

Magna Energy & Hydro Systems Pvt Ltd (Chennai, India)

Manufacturer

Magna Energy & Hydro Systems is the leading supplier of high and ultra high pressure pumps; we also manufacture high and ultra high pressure pump units and a wide range of water jetting accessories including nozzles, water blasting guns, sandblasting Guns, sewer cleaning nozzles, tube cleaning nozzles, humidification & fogging nozzles, process pump

High Pressure Technologies LLC (Valencia, CA)

Manufacturer, Contract Manufacturer, Distributor

Widely used for Pressure Testing and Fluid Power applications, Maximator Air Driven High Pressure Pumps will produce Hydraulic pressures up to 60,000 psi. These High Pressure Pumps are available for Oil, Water or Chemical use, and are offered in a variety of materials and sealing arrangements.

Sunfab North America (Somerville, NJ)

Distributor

We will supply you with the highest quality hydraulic pumps and motors, high pressure piston pumps, dual flow piston pumps, variable displacement pumps and pumps for operating hydraulic equipment in mobile applications, such as snowplows, spreaders, concrete mixers/pumpers, refuse trucks, dump trucks and tankers.

Udor USA (Lino Lakes, MN)

Manufacturer

Major manufacturer of diapghragm and plunger high pressure pumps. Udor pumps go up to 200 l/min and now up to 500 BAR. The new PENTA pump is a quintuplex plunger pump 500 bar. Visit our web site at www.udor.it

Dynex/Rivett Inc. (Pewaukee, WI)

Manufacturer

Dynex manufactures hydraulic components and systems used in demanding applications, including high pressure, special fluids, dirty environments and long duty cycles. Products include piston pumps, directional and pressure controls, vane and piston motors, linear actuators, and power units.

Time Rolling Development Limited (Dalian, China)

Manufacturer, Contract Manufacturer, Distributor

Time Rolling offer API 610 BB1, BB2, BB3, BB4, BB5 Pumps The BB5 Pump spec as following, which can reach max. pressure @25Mpa Pump size DN:40~200mm Capacity Q:~700m3/h Head H:~2500m Operating pressure P:~25MPa Operating temperature T:-80oC~+450oC

Liquiflo (Garwood, NJ)

Manufacturer

Liquiflo's 4-Series pumps are low flow/high pressure magnetically-driven gear pumps that are completely field repairable. The 4-Series housings are manufactured from Bar Stock in 316 Stainless Steel, Alloy-C or Titanium.

Gorman-Rupp Co. (Mansfield, OH)

Manufacturer

Gorman-Rupp is a leading manufacturer of pumps and pumping systems for the municipal, water, wastewater, sewage, industrial, construction, petroleum, fire and OEM markets.

A.R. North America, Inc. (Fridley, MN)

Manufacturer, Distributor

AR North American manufactures high pressure pumps, plunger pumps, positive displacement pumps, reciprocating pumps, stainless steel pumps, and triplex plunger pumps.

Cat Pumps? (Minneapolis, MN)

Manufacturer

Cat Pumps are triplex, high-pressure pumps with pressures up to 10,000 PSI [690 BAR]. Our triplex high-pressure positive displacement pumps deliver a consistent flow at high-pressure for injection, surface prep and hydrostatic testing applications. View high-pressure pumps on-line at PRODUCt SELECTOR: 781, 1560, 2510, 1810, 3560, 3801, 6801

China Trade Development Corp. (Newport Beach, CA)

Distributor

Clyde Union Ltd (Glasgo, United Kingdom)

Manufacturer

Demay International (Conroe, TX)

Manufacturer

Dupoly Marketing Private Limited (Ahmedabad, India)

Manufacturer

Kerr Pump Corporation (Sulphur, OK)

Manufacturer

KMT Waterjet Systems (Baxter Springs, KS)

Manufacturer

Sundyne (Arvada, CO)

Manufacturer

Haskel International, Inc. (Burbank, CA)

Manufacturer, Contract Manufacturer

Haskel air driven liquid pumps work on an automatic reciprocating differential area principle that uses a large area air drive piston connected to a smaller area hydraulic piston/plunger to convert compressed air power into hydraulic power.

Search by City, State or Zip
Map of USA
Tell your Colleagues About Zycon
Tweet
Product News
Submit a Press Release
Newsletters
Read About the Latest Innovations in the Manufacturing, Energy, Medical & Defense Industries
Sign Up for e-Newsletters

Results 1 to 22 of 22

^ Return to Top

Click on a state to see companies serving the area and surrounding areas:  X  
Map of United States
X

Need Help Finding Something?

Type what you need and our research team will try our best to help you find it.

If you need to include an attachment, or need more space, please click here for a larger form.

Submit    Close